Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Prblrm with IBIS to DML transkation in Orcad Model Integrity

Status
Not open for further replies.
S

shurilo

Newbie level 6
Joined
Nov 16, 2004
Messages
13
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,283
Activity points
144
ibis to dml

Hi all,
I need to simulate some circuit in Orcad SigXP, to do this first need to translate IBIS to allegro .dml format. The Model Integrity tool shows several woarnings in the IBIS, no error, just warnings. When trying to run IBIS2DML, it says ibis2spectra fialed - no additional details. What could be the problem? The warning in IBIS are of 2 types :
1.non-monotonic values
2.extreme currents


Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top