Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

powerline communication PLC-IC

Status
Not open for further replies.

Luca_Romano

Junior Member level 2
Joined
Apr 24, 2015
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
189
Hi All,

I am planning to design a Narrowband PLC unit.
I'm thinking to use AFE032 (Texas Instruments) or MAX2992 (Maxim)
Please could you give me some tips. Any help will be really appreciated.
ciao thanks
hopefully,
Luca
 

schmitt trigger

Advanced Member level 5
Joined
Apr 17, 2013
Messages
2,680
Helped
847
Reputation
1,698
Reaction score
827
Trophy points
1,393
Activity points
17,986
Your best bet is to use the manufacturer's models, app notes, datasheets and evaluation boards.
There is a lot of reading to do.
If your product is a commercial product, you may even contact the vendor directly and request information from a support engineer. Be aware that, the support engineer will expect you to have already read the available documentation, experimented a little with an evaluation board, and to have specific questions.
 
Last edited:

Luca_Romano

Junior Member level 2
Joined
Apr 24, 2015
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
189
Hello Schmitt trigger:)

thanks a lot for your advices:). I'm going to buy a PLC evaluation board from Texas Instruments and I will make good use of their support engineer service.
Have a nice day.
Ciao
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top