Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Power supply design for 24V 30A and 12V 5A in single setup

Status
Not open for further replies.

anboli

Full Member level 2
Full Member level 2
Joined
Mar 9, 2012
Messages
144
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,298
Visit site
Activity points
2,513
HI,

I had using the 24V 15A SMPS now, but its getting problem with my application. So i thought to ready with own power supply design. I having the confusion to choosing the transformers and whats range have to select. My output wants dual 24V output with 15A each and 12V 5A. This was my output requirements. Could anybody suggest the idea for me to design the circuit from the basis. And i saw there was different type of transformers, and also tell me which one will suitable for my application.

Thanks in advance,
anboli
 

My output wants dual 24V output with 15A each and 12V 5A. This was my output requirements. Could anybody suggest the idea for me to design the circuit from the basis. And i saw there was different type of transformers, and also tell me which one will suitable for my application.

dual o/p 24v 15a & 12v 5a you mean 720watts for +/- 24v & 12v 5a= 60watt total of 780watts
use e55 core
 

HI,

I had using the 24V 15A SMPS now, but its getting problem with my application. So i thought to ready with own power supply design. I having the confusion to choosing the transformers and whats range have to select. My output wants dual 24V output with 15A each and 12V 5A. This was my output requirements. Could anybody suggest the idea for me to design the circuit from the basis. And i saw there was different type of transformers, and also tell me which one will suitable for my application.

Thanks in advance,
anboli

Hi anboli
Have a look here please :
https://www.edaboard.com/threads/229615/

from page one up to it's end then you'll catch what to do as well .

Best Wishes
Goldsmith
 
Last edited:
  • Like
Reactions: tpetar

    tpetar

    Points: 2
    Helpful Answer Positive Rating
You want to make new psu design based on SMPS or iron transformer ?

Output 24V 15A DC and 12V 5A DC ?


Best regards,
Peter

Output 24VDC 15A, 24VDC 15A and 15VDC 5A, totally three positive ouptuts i need.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top