Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Power problem in TFT LCD with ILI9320Controller

Status
Not open for further replies.
L

LOSTISLAND

Member level 3
Joined
Jun 8, 2010
Messages
54
Helped
6
Reputation
12
Reaction score
5
Trophy points
1,288
Activity points
1,682
Hi all,
I’ve got a problem with TFT LCD with ILI9320Controller,
Sometimes disconnecting the power supply and then connecting that after nearly 2 seconds results in malfunction , in a way that there nothing could be seen on the screen.
By the way I don’t have this kind of problem with TFT LCD with SSD1289Controller .
What’s the problem ?
Thanks in advanced
 

Re: Power Problem on LCD

Solved
I replaced 1uF CAP instead of 100nF in the power on reset of the microcontroller and the problem is solved now .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top