Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PORT - What is the status of the I/O pins of the LPC2114

Status
Not open for further replies.
N

narithota

Full Member level 1
Joined
Apr 21, 2006
Messages
95
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
2,077
PORT

Hay

What is the status of the I/O pins of the LPC2114 when the controllers RESET
According to the data sheet when controller Resets the I/O pins act as the Inputs and status of the pins is Undefined.
Voltages across the pins are 3.3V, 2.1v, and 0.1V when controller reset
Please give some information regarding the I/O port internal structure

Regards
nari
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top