Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Point to point communication with SIM900

Status
Not open for further replies.
H

hossein_atp

Newbie level 2
Newbie level 2
Joined
Nov 25, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
17
Hello my dear friends

I have designed a project with LPC2364 and I have used a SIM900A for remote communications.
I have run the SIM900A properly with UART and I can send and receive SMS easily.

My problem is sending data by SIM900A , since I want to update the firmware of this project by SIM900A I need a point to point communication , my data size is about 64kB(flash size of LPC2364) and it's format is "Intel hex" .

If I can send the Hex file to my remote project , then I change it's firmware by Boot Loader.
Please help me to send files via SIM900A.

Thanks a lot.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top