Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Pnoise simulation for a down-conversion mixer

Status
Not open for further replies.
J

Jeni28

Newbie level 1
Newbie level 1
Joined
Jun 3, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,286
Hi all,
I'm simulating the NF af a down-conversion mixer using pss and pnoise.
All the cadence tutorails say you should set the RF port to DC,
and then, when you choose the reference sideband in the pnoise form, you should choose + or -1 so your input frequency is Flo.
I don't understand this.
Isn't the input frequency the Frf frequency? and why isn't it being taken into account?

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top