Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PLZ!!! Help me out, guide me with proper circuitry

Status
Not open for further replies.
A

ayyub

Newbie level 6
Joined
Jul 11, 2008
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,384
PLZ!!! Help me out

Hi Friends!
I got a Current Transformer 30/5 A with 15VA. I connected a load of 2200W and it is giving me only 0.35Amp .I want to measure the load from current transformer and willing to display it on lcd.Therefore i want dc voltages from current transformer from 0 to 5V DC such that it varies between these voltges as i increased the load because i want to interface it with adc of microcontroller.
I'll be thankful to you if you guide me with proper circuitry of the above mentioned system
 

PLZ!!! Help me out

2200W is probably saturating your coil, and the Mpp is probably not 2200W for one of those little coils:)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top