can i use TRAN-2P3S for circuit shown in the diagram? because i nid to use center tap at the input of the transformer. can i juz invert it (X-Mirror) to get 3 input primary winding with center tap and 2 output secondary winding?
and i have the problem of missing circuit/package in physical partlist. how to solve it?
another question is how to configure the transformer in proteus? what should i put for the component value, primary inductance, secondary inductance and coupling factor?
the input of my transformer is 50V, 6.3A, 50Hz
the output of transformer is 230V, 1.4A, 50Hz
As a starting point, as Il on the primary is 1.4A, then Imag = 1.4/20 A, hence XLp = 230 X 20/1.4 . do the same for the secondary. If Rp = 3% of 230 /1.4, repeat for secondary. This will get you into the right ball court.
Frank