I am curious if there is a way to plot a graph of the absolute component of the E-field in the near field vs distance (or frequency) when using transient solver in CST Microwave Studio software. Appreciate any help!
You can define a curve in your model prior to running the simulation. Then, click on your E-field folder and under the 2D/3D Plot tab you can choose an option "Evaluate Fields on Curve".
Thank you for responding. I am grateful for telling me step-by-step.
I have some problems and get errors like this : Template based postprocessing result "curve1_e-field (f=6.5) (1)":
Error in calling "Evaluate1D" function (Unable to determine path for curve 'curve1'. Please define curve with connected segments.)
Hmm... I have never gotten said error before. However, I have always "evaluated fields on curves" in the click of a button under 2D/3D Plot tab without going through TBPP.
Having said that, seems like the error indicates something to do with the pre-defined curve.
Looks like you are using CST 2015, which is all good because I have that version too.
If you'd like, you can attach your cst file for me to have a look at.
Hmm... I have never gotten said error before. However, I have always "evaluated fields on curves" in the click of a button under 2D/3D Plot tab without going through TBPP.
Having said that, seems like the error indicates something to do with the pre-defined curve.
Looks like you are using CST 2015, which is all good because I have that version too.
If you'd like, you can attach your cst file for me to have a look at.
hello. please how can i plot abs(E) below the microstrip in the substate, at the center of the substrate and along the stripline in CST. This is standing wave pattern