Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Plot becomes invalid due to no available solution

Status
Not open for further replies.
V

Vijay Kumar Gorli

Newbie level 1
Newbie level 1
Joined
Jul 14, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
8
Hi,

I am working with Ansoft-Maxwell for my project and designed the disconnector and simulated the discoonector in open condition.
The problem is it displays that the plot 'Mag E' becomes invalid due to no available solution. As I am wanted to plot the electric field in the plane and see the plot which wasn't possible.
I also used region as boundary and applied 0 kV to one arm of disconnector and other arm with 267 kV to know the electric field distribution.

Can anybody help me to solve this as I got stuck here.

Thanks,
Vijay.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top