Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Please review the spectrum for my OFDM simulation

Status
Not open for further replies.

Antonio_Magma

Full Member level 2
Joined
Jun 21, 2005
Messages
136
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Activity points
2,777
Guys, i've finished my basic ofdm model and i'm currently working on
the synchronization & later the modelling of the power line transfer
function...

But i just wanna check out with you guys first whether my spectrum is
correct or not...

This is my model (50kb), the AWGN SNR is set at 30...
https://geocities.com/antonio_magma/model.jpg

And this is my output Tx spectrum, averaged about 50 samples
(50kb)
https://geocities.com/antonio_magma/fft.jpg
Notice that i have a deep notch at the 0, its because i have 3 zeros on
both sides of the Fs...

I just want to know have i done it right. Please comment...thx guys...

PS: Does anyone know the sequence for HomepLug's synchronization frame?
 

gayathri123

Member level 1
Joined
Jan 6, 2009
Messages
37
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Activity points
1,438
can you help in finding matlab coding for basic OFDM structure.please if you find it send to me because it is very urgent.
 

Communications_Engineer

Advanced Member level 3
Joined
Oct 10, 2008
Messages
895
Helped
179
Reputation
358
Reaction score
105
Trophy points
1,323
Location
Sindh, Pakistan
Activity points
5,542
Download a thesis reagardin OFDM and its simulation using Matlab from yahoo group telecom_research and join yahoo group ofdmmatlab

Your problems will hopefully be solved
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top