Not , i am using the MPLAB ICD2 , i just bought it from microchip , what i did mas to solder the DSPIC33fJ64GP310 in a generic board for smt components , i connected to VCC ( 3.3V) pins
2,16,37,46,62 and 86
VSS (gnd) pins 15,36,45,65,75
AVdd --> 3.3 v
AVss---> ground
Vddcore ----- capacitor 22 uf to ground
MCLR----- pull up resistor to vcc of 10k
and the pins of the connector PGD2 ,PGC2 , MCLR, VCC and Ground
and when i connect the MPLAB it say the self test passed but it did not detect the chip ( warning 20 target id device error)