Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

please help me read the opamp buffer datasheet

Status
Not open for further replies.
H

henrywent

Member level 5
Joined
Dec 29, 2008
Messages
83
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,288
Location
china
Activity points
1,869
Hello there,
please help me read the datasheet of a opamp buffer. Part of the datasheet is posted here. In the DG (differential gain) field, what does '' RL=150Ω to 0V '' mean ? why does volt appear in the unit of a resistor? AND what does DG=0.06% mean ? thank you for reply !
 

It means a 150 ohm resistor from the output to a 0 volt source
(or ground, if the two are the same). Two attributes of the load
are expressed here, its potential and series resistance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top