bakii
Newbie level 1
hi every one!
I have problem with application written in visual basic language, i know this is not a good place....
On one side i have board with PIC 18f4520 and on the other side is PC with application written in visual basic. I can send data from application to PIC, but i can't send data from PIc to pc, i send it and i see it with wireshark, but my application doesn't detect it. I've checked program in PIC several times and everything works perfectly, I've written arp, icmp so when i ping my board everything goes without problem, when check arp cache there is my MAC address...I am using ethernet controller
ENC28J60, PC ipAddress is 192.168.1.11 , and PIC ipAddress is 192.168.1.10 (mask 255.255.255.0)
I would be very grateful if someone could give me advice or opinion. I've attached pictures from wireshark and visual basic application code..
sorry for my bad english...
I have problem with application written in visual basic language, i know this is not a good place....
On one side i have board with PIC 18f4520 and on the other side is PC with application written in visual basic. I can send data from application to PIC, but i can't send data from PIc to pc, i send it and i see it with wireshark, but my application doesn't detect it. I've checked program in PIC several times and everything works perfectly, I've written arp, icmp so when i ping my board everything goes without problem, when check arp cache there is my MAC address...I am using ethernet controller
ENC28J60, PC ipAddress is 192.168.1.11 , and PIC ipAddress is 192.168.1.10 (mask 255.255.255.0)
I would be very grateful if someone could give me advice or opinion. I've attached pictures from wireshark and visual basic application code..
sorry for my bad english...