I have seen the code, but I don't have C18 compiler..
I've noticed in the main code "hi.c" that there's no settings for what kind oscillator/clock is to be used.
You could change the settings either in the main code or in the IDE.
In the MPLAB IDE menu, choose "Configure" -> "Configuration Bits.."
under the "Oscillator" Category, Select either "XT" or "HS" (or whichever is applicable to your application)
hi everyone, im adam from france im 20
im in an internship now ,
im working on an interactive panel of monochrom leds, i have done the scheme on the electronic board using a pic18F4520 via TLC 5940 for driving 16 leds plus 2 IR leds "one transmits the signal while the second receives it" WITH MPLAB C18 in order to blink leds just by moving one's hand upon the panel, i have beeen inspired by the schemes with "arduino" micros already done on the web by other people , and i tried to do the same with the pic , i think im ready for the next level by programming the 16 leds ,I HAVE TO DO IT WITH c language, but as im not that good with C , i hope you could give me some help through this study,
I APPRECIATE ANY HELP OF THE PROGRAM I REALLY NEED IT THANKS IN ADVANCE
i have done the same with my pic **broken link removed**...
my problem is that i can't find eagle 4.09r2 libraries for tlc4950 and ARDUINO MINI, i've already tested some examples found on the net but all of them was conceived for eagle 5.6.0 and that wasn't accepted by the 4.09 version .so i'm really pissed off , it's making me sick ,lol, i don't know where to get them,
hi i ve done my eagle steps for my schematic and the board as well i ve got 100%, now i need to convert it to excellon and gerber formats in order to order an industrial panel with my schematic on it , how ?