i got download MikroC software, but the compiler icon invisible.why? where i can get license key? can give the key? please send to my email
pusparaja_09@yahoo.com.
can send the link to download C programming? please help
---------- Post added at 12:42 ---------- Previous post was at 10:44 ----------
hi...his is coding for transmitter using pic compiler
#include <16f877.h>
#fuses HS,NOLVP,NOWDT,NOPROTECT
#use delay(clock=20000000) // 20 MHz crystal on PCB
//#use rs232(baud=19200, xmit=PIN_A0, rcv=PIN_A1) // you can use any pins for software uart...
#use rs232(baud=9600,xmit=PIN_C6,rcv=PIN_C7,UART1) // hardware uart much better; uses RC6/TX and RC7/RX
// characters tranmitted faster than the pic eats them will cause UART to hang.
#include <stdlib.h>
#define LED_0 PIN_B0
void main() {
while (TRUE) {
if (input(PIN_D0)){
output_high(LED_0);
printf("a"); //sends signal a
}
else{
output_low(LED_0);
printf("b"); //sends signal b
}
}
}
this coding function, i want add more sensor but dont know how..please help me...
from this coding the sensor connected to PIN DO
void main() {
while (TRUE) {
if (input(PIN_D0)){
output_high(LED_0);
printf("a"); //sends signal a
HOW TO CONNECT MORE SENSOR and how to upgrade this coding..please help...
and also from this coding use #use rs232(baud=9600,xmit=PIN_C6,rcv=PIN_C7,UART1)
if i use trasmitter tws 434 how to connect it? is that need Encoder HT12E?
please advice me..