I have a simple PIC16F84 LCD design which actually works with test board. I'm trying to get familiar with Proteus ISIS so I implemented the desing to it. The simulation seems to work (those blue and red dots are blinking) But I can't get anything to the LCD?
I have a simple PIC16F84 LCD design which actually works with test board. I'm trying to get familiar with Proteus ISIS so I implemented the desing to it. The simulation seems to work (those blue and red dots are blinking) But I can't get anything to the LCD?
Hi "mzypt";
You have a problem about the 4bit LCD timings (see the screenshot jpg in the attachment). Examine the delays after any Nybbleout...
I don't have time enough now, however I had make for you a repaired working DSN project and included an other project (written by me), this is using also a 16F84 and a 4bit LCD interface. It is a "road crossing"demo project and using four LCDs at a time. Study its source and use it if you want.
Thanks. I highly appreciate your effort.
I'll investigate those samples you sent me. Great stuff. And maybe I can edit worktimer code and get it work with ISIS. Althoug it works with real PIC.