Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIC BlueTooth PC interface

Status
Not open for further replies.
A

amitaiwe

Member level 3
Member level 3
Joined
Feb 19, 2014
Messages
57
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Visit site
Activity points
547
Hi,
I am sending data from a PIC16f877 to a Bluetooth module RN42SM and from there to a PC.
The way the PIC sends the data is continuous transmission of 8 bit words. (see figure)
The RN42SM uses the SPP standard and emulates a serial cable.
will the data received in the PC via BT be continuous 8 bit words as well,
i.e. one long string of numbers?

Thanks, Amitai


Capture.PNG
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top