dnimreven
Newbie level 2
Hello everyone!
It's my first post here and i really need some help on my project! So i'm building a temperature sensor, using a lm35 sensor, a pic16f877a interfaced with a nokia 3310 lcd, programmed using pickit2. Obviously, i need the temperature to be shown on the LCD.
First of all, i'm a bit newbie programming, so I was having a hard time in the beggining, but with the help of my partner I was able to get things going on my simulation on Proteus. So everything was working perfect. Then I had some trouble making the connection between the pickit2 and the pic, since the pic wasn't recognized. I was able to solve those problems (with a lot of help from this forum, so thanks!) and I finally went forward to test everything today. The thing now is, nothing shows on the LCD. I really don't know if there's something wrong about the LCD, or i'm just doing it wrong. It's my first time in a project like this, i've never used a pic before, nor a LCD, and as i said i'm a bit newbie to all this, so i could really use some help :/
I can put here the schematics and simulation that I have on Proteus, and the code i'm using too, if it helps
Thanks :grin:
It's my first post here and i really need some help on my project! So i'm building a temperature sensor, using a lm35 sensor, a pic16f877a interfaced with a nokia 3310 lcd, programmed using pickit2. Obviously, i need the temperature to be shown on the LCD.
First of all, i'm a bit newbie programming, so I was having a hard time in the beggining, but with the help of my partner I was able to get things going on my simulation on Proteus. So everything was working perfect. Then I had some trouble making the connection between the pickit2 and the pic, since the pic wasn't recognized. I was able to solve those problems (with a lot of help from this forum, so thanks!) and I finally went forward to test everything today. The thing now is, nothing shows on the LCD. I really don't know if there's something wrong about the LCD, or i'm just doing it wrong. It's my first time in a project like this, i've never used a pic before, nor a LCD, and as i said i'm a bit newbie to all this, so i could really use some help :/
I can put here the schematics and simulation that I have on Proteus, and the code i'm using too, if it helps
Thanks :grin: