Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Phased Array Antenna Integration Problem

Status
Not open for further replies.

saad_mansoor

Newbie
Newbie level 1
Joined
Apr 5, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Pakistan
Activity points
1,300
I've successfully simulated array of 4 elements at 5.2 GHz, Wilkinson Power Divider, and Hybrid Coupler for phase shift purpose.

I've changed capacitance at port 2 and port 3 of Hybrid coupler and got the desired angle shift.

When i attach Hybrid Coupler and Array antennas then beam steers according to desire.
but when i attached Power Divider with above arrangement , my pattern disturbs drastically.

Could anyone help me what changes i should do in order to have pattern perfect?

I'M USING CST MICROWAVE STUDIO SOFTWARE
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top