Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PFC inductor cost comparison?

Status
Not open for further replies.

cupoftea

Advanced Member level 5
Joined
Jun 13, 2021
Messages
2,497
Helped
53
Reputation
106
Reaction score
108
Trophy points
63
Activity points
13,014
Hi,
Doing a 230W PFC, 100-265VAC. 400Vout
100Khz
CCM
LT1248

Could use a inductor made from a PQ3535 with AL=315 and 31 turns, for 300uH.
http://ferroxcube.home.pl/prod/assets/pq3535.pdf

.....However, wondering whether the production and part costs for a sendust/Kool-mu torroid type inductor will be cheaper?….though of course, it doesn’t have the nice former to mount it on…..so needs a bit of “fiddle” from the production staff.

So which is likely to be cheaper?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top