permittivity of a material only in 50Hz

[yasine79]

hi!
i am doing some simulations in hfss. i am working in the range 2 to 4GHz. i am using a material. its permittivity value is availible only in 50 Hz. is there any options in hfss to get the permittivity in 2 to 4GHz?


thank you all

 

[FvM]

Possible options:
- assume constant Er, use 50 Hz value
- refer to other resources
- give it up

 

[yasine79]

thanks for the answer!
but i want to do some comparison between practice ans simulation.

that is why i need the permittivity in the working range.

 

[FvM]

If you want to ask a question, you should mention the material.

 

[dopplerjeff5000]

If it's a material of interest at these frequencies I am almost sure that someone would have measured it and reported it in the literature. If not, you should perform this measurement and get a publication!

 

[jiripolivka]

No "hfss" gives you data on material permittivity. Find material properties in literature or measure it