Jun 30, 2005 #1 P priyaphule Junior Member level 1 Joined Jun 7, 2005 Messages 17 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,436 hello, i want to develop an serial card which will be interfaced to pci bus so.. i will get some data on the pci bus from the serial port now how i can check whether the data reached properly at the other end of the pci bus should i develop 2 pci cards to check the communication(which is not preferable and reliable) mean while can i use pc to check the communication if it is so what chenges are required at the pc end priya
hello, i want to develop an serial card which will be interfaced to pci bus so.. i will get some data on the pci bus from the serial port now how i can check whether the data reached properly at the other end of the pci bus should i develop 2 pci cards to check the communication(which is not preferable and reliable) mean while can i use pc to check the communication if it is so what chenges are required at the pc end priya
Jul 9, 2005 #2 M moorthy_edec Newbie level 1 Joined Apr 11, 2005 Messages 1 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,290 hi, i am moorthy.now i am invoving to design PCI board.if u have full workable PCI hardware then no problem.just download the JUNGO WINDRIVER from jungo website.but your PCI hard ware should consist JUNGO supported devices. bye, here, moorthy.T
hi, i am moorthy.now i am invoving to design PCI board.if u have full workable PCI hardware then no problem.just download the JUNGO WINDRIVER from jungo website.but your PCI hard ware should consist JUNGO supported devices. bye, here, moorthy.T