[SOLVED] Parallel Port Related Question

[nick703]

hello friends i have a question about parallel port program .

1> i have a three motor .
2> i have a two switch. initially switch is connected to relay via controlling through parallel port ok.
3> in this two switch one switch operate three motor right and second switch operate only one motor right.

so my question is my software side which type of coding to do
1> all motor on
2> all motor off
3>out of three motor two motor start and one motor stop
4>out of three motor two motor stop and one motor start

 

[HTA]

Hello Nick703,

how can someone know(from your description) what microcontroller hard- and software you have?

Enjoy your design work!

 

[andre_luis]

...so my question is my software side which type of coding to do...

What language are you using to program this code ?
Over what operational system this program will run ?


+++

 

[nick703]

Hello Nick703,

how can someone know(from your description) what microcontroller hard- and software you have?

Enjoy your design work!

thanks for reply HTA i have a hardware which have no any microcontroller .i used lalim parallel port exe as a reference and i changed to c# form based application.