Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

OTG problem referring to a handset embedded with USB 1.1 and USB 2.0

Status
Not open for further replies.
B

billjoe

Member level 1
Joined
May 2, 2005
Messages
34
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,576
Q: if I have a handset embedded with USB 1.1 HOST and USB 2.0
Device (two port)
can I connect to any OTG device(if OTG be a Host , then connect to 2.0 Device,
if OTG be a device , then connect to 1.1 host ,
with port transfer line ) ?
or I still need a USB OTG PORT?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top