Oscillator and mark/space ratio

Status
Not open for further replies.

shoivn

Junior Member level 1
Joined
Feb 9, 2006
Messages
19
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,443
Oscillator

Hi all!
I have some questions about Oscillator.Please help me!

***Wien
**broken link removed**
1/What determines amplitude of the output when the gain is greater than the value needed to oscillate?
**broken link removed**
2/The value of (R4+R5) can just be varied in some limit.What causes this?What will happen if this value is out of limit?

***LC Oscillator
**broken link removed**
What is the most important component which determines the frequency of this LC oscillator?

***Multivibrator
**broken link removed**
1/what is mark/space ratio?What will happen when we change this ratio(does the frequency change?...)
2/If C1 and C2 are different,does the frequency change with mark/space ratio?
3/When mark/space ratio is 1:1,how is the signal's spectrum?
 

Oscillator

The first one R3 and R4 sets the gain.

The second one R3 and R4 sets the gain, but R5 and the two diodes are for avoid saturation. When the amplitud increases (positively or negatively) one diode activates and put R5 in parallel with R3 that makes resistence reduces.
 

    shoivn

    Points: 2
    Helpful Answer Positive Rating
Re: Oscillator

In LC generators frequency depends on both: L and C ..

Mark-Space ratio is explained on the attached pictures ..

Regards,
IanP
 

    shoivn

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…