Optisystem cosimulation with Microwave Office

[fracosoe]

Optisystem 6.0 can do cosimulation with Agilent ADS via signal waveform data. The data contain time and voltage of each sample.
Description of Optisystem:
"This component can save files in the 'TIM' format. The .tim and files are signal data files in Agilent EEsoft ADS, MDIF format. They contain time-domain waveform data for defining the signals associated with certain sources."

The problem is, I don't have ADS, but we have Microwave Office. Does anyone how to save/load waveform data of MWO to .tim format?

Thanks in advance

Regards,
fracosoe

 

[madengr]

No, but you can use the PWL source or either HB or Hspice simulations. The PWL source can read it's values from a text file; time in the first column and voltage in the second. Be careful using the PWL source with HB since it must be periodic.

To write data to a file, choose a graph, then export trace data from the graph menu.

If you are using VSS you can use data source and sink.