Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

One question on the possible impact on the circuit of SOP-8

Status
Not open for further replies.

chang830

Full Member level 5
Joined
Feb 11, 2006
Messages
268
Helped
14
Reputation
28
Reaction score
3
Trophy points
1,298
Activity points
3,436
Hi,

We have a RF receiver chip with die and we bording it directly on the PCB. The measurements is OK from the 5V to 2.4V supply. We also packged it with SOP-8 form. But the measuremsts shows that it is OK for the 5V to 3.3V. But below 3.3V, the sensitivity started to decrease and even failed to work under 3V supply. I am wondering why my chip with package have worse permance than the die?

Anyone pls. give me some light on it? I dodn't undesratsnd why the working supply have problem with package?

Thanks in advance
 

FvM

Super Moderator
Staff member
Joined
Jan 22, 2008
Messages
47,652
Helped
14,075
Reputation
28,407
Reaction score
12,742
Trophy points
1,393
Location
Bochum, Germany
Activity points
276,859
I don't hear any information besides supply voltage and a package. That's somewhat poor to discuss about receiver problems, I fear.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top