Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Normalized travelling waves in S parameter definition

Status
Not open for further replies.
V

vlsi_design2

Member level 1
Member level 1
Joined
Nov 30, 2014
Messages
41
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Visit site
Activity points
1,610
Hi,

Why S parameters are defined in some books in terms of normalized travelling wave voltages a1, b1 where a1=(V+)/sqrt(Z0) and b1=(V-)/sqrt(Z0).
They can also be expressed in terms of V1+ and V1-. Why normalize?

Is it because it is easy to get power as 1/2.square(a1) ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top