Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] NIOS II on Altera Stratix V : Error while creating bsp

Status
Not open for further replies.

electrobuz

Member level 2
Joined
May 20, 2013
Messages
46
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,638
I have made a design using the Nios II core in qsys. After compiling successfully, I proceed to Nios2EDS to create a new Nios II application and BSP from template. After selecting my .spocinfo file and clicking on finish, I get the following error :
Failed to execute: ./create-this-bsp --cpu-name cpu --no-make

Does this mean my hardware design is incorrect? How can I solve this?

Thanks.

- - - Updated - - -

Solved.

The Nios2 EDS cannot simulate a design with MMU. This can be found in the logs.
SEVERE: HAL-based operating systems do not support a CPU with an MMU.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top