Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

.NET Micro Framework

Status
Not open for further replies.
V

VirusX2

Member level 4
Joined
Nov 18, 2014
Messages
76
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,836
Hi, can i use .net micro framework for on custom made board? I dont want netduino or simillar boards. I saw that the framework support STM32 ARM microcontrollers but on some evaluation kits. I want to make my own pcb design with one of supported microcontrollers and run .net code on it. Is this possible?
 

Currently the .NET Micro Framework supports primarily the ARM7, ARM9 and ARM Cortex-Mx architectures with some past support for the Analog Devices Blackfin for C# and VB.NET languages.

In theory, it can be ported to other microcontroller architectures utilizing the NETMF Porting Kit which is freely downloadable from the following website:

.NET Micro Framework

Therefore, yes if the microcontroller architecture of your design is supported or you care to port the device specific software to another architecture you can design and produce your own development board.


BigDog
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top