Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Negative Voltage generation using regulators

Status
Not open for further replies.
@masab_ahmad: I don't think it works that way.First of all,these devices need an external component—a compensation capacitor at the output.
Why not using two 24V DC batteries connected in series with their mid-point connected to ground,so that you have +24V & -24V & then using 7915
 

I actually wanted to give + and - 5V to an op amp, and wanted to use 2 small cell phone batteries in series and later regulate the output to the op amps, so the circuit i posted above is not possible?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top