Hi all .Who can post simple schematic and firmware of Jlink that use CLK, SWDIO và GND signal ? I want do simple circuit to programing for ST32 microcontroller.
Help me!
Hi all .Who can post simple schematic and firmware of Jlink that use CLK, SWDIO và GND signal ? I want do simple circuit to programing for ST32 microcontroller.
Help me!
Buy a STM32VL-Discovery board (Cheap) , or a STM32F4-Discovery (Powerfull) both has an onboard SWD programmer that also can program external ST ARM chips.
You can't build a programmer as cheap as the VL board.
Every body can see simple Jlink board with link : www.pnlabvn.com/pnlab/components/com_virtuemart/shop_image/product/cfcd9228365892481e5f180070b58a4b.jpg
This board with ST32F103 and some capacitor and resistor.To make it is very cheap.
Hi all .Who can post simple schematic and firmware of Jlink that use CLK, SWDIO và GND signal ? I want do simple circuit to programing for ST32 microcontroller.
Help me!
If you want to do it, figure out how and don't ask for the IP other firms have created. There is a very low cost JLink EDU.
The lowest cost is STMxx Discovery and you can't even make a board for the price these things cost.
So, if it is for the learning, do not copy, if it is for the purpose to have a programmer, use Discovery or JLink-EDU, if you want to use it for professional work, don't do either one.