Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need program for displaying time in lcd by using lpc2148

Status
Not open for further replies.
If you mean,displaying time in 24 hour format,then you need to use an RTC(real time clock) chip and set it at a fixed time to start in hh:mm:ss format.Start it at 00:00:00 and then it must communicate with the LPC2148 by sending the time data on the RAM through a data transfer port(use either I2C or SPI for this purpose) to transfer data to the controller and also set it to refresh the reading of the clock every second.And to show the time,connect the 16X2 LCD port for the output.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top