Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need help with surplus LCD

Status
Not open for further replies.

cyberatom

Junior Member level 1
Joined
Mar 13, 2002
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
84
I have found a nice large lcd from some electronic type writer and I would like to use it for my own projects. The problem is that I cannot find any info on the net on this type of lcd display so I am wondering if anyone here could point me in the right direction...

The lcd display has a p/n etched onto the circuit board which says:
HP P/N 00090-60004
MADE IN JAPAN
NMC-5V
P300009010
EPSON

It also has a sticker with:
EPSON
ECM-A0021
404A42

The circuit board has plenty of ic's: E-1121 and one E-1131.

I would be more than grateful if someone could tell me how to implement this lcd. Thanks in advance.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top