rank44
Newbie level 6
I have a dsPIC33FJ64GP802 and the PICKIT2 Programmer I made Adapter for the PICKIT2
1) pin 1 MCLR
2) pin 4 PGED
3) pin 5 PGEC
4) pin 8 VSS
5) pin 13 VDD
this is the Adapter to the PICKIT2 I hope this right it my first time do I need to connect to pin28 AVCC and pin 27 AVSS I have program the dsPIC33FJ64GP802 was OK but the next time I try to test it Failed to read and Erase
What I need to no is Why the the programmer with the software say Failed on all the test on the dsPIC33FJ64GP802 when the Voltage was 3.3v and it program the Chip OK and now it Failed this was for the Wib Server from Silicon Chip project and when the voltage is ok in the project and it will not work.
1) pin 1 MCLR
2) pin 4 PGED
3) pin 5 PGEC
4) pin 8 VSS
5) pin 13 VDD
this is the Adapter to the PICKIT2 I hope this right it my first time do I need to connect to pin28 AVCC and pin 27 AVSS I have program the dsPIC33FJ64GP802 was OK but the next time I try to test it Failed to read and Erase
What I need to no is Why the the programmer with the software say Failed on all the test on the dsPIC33FJ64GP802 when the Voltage was 3.3v and it program the Chip OK and now it Failed this was for the Wib Server from Silicon Chip project and when the voltage is ok in the project and it will not work.