Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need help on the 2732

Status
Not open for further replies.

Rambo55

Banned
Joined
Oct 7, 2009
Messages
63
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,288
Location
Australia
Activity points
0
I have new 2732 Rom are 21volts I have a Willem Programmer I have program/test ram has Error at 0x000000 chip=0x00 buffer = $000000 0xFF I have Erase for 10 min I have use the same Eraser for the 2764 and the 27512 Rom and Erase them OK but when I Erase the 2732 and do a check Device is not Empty $000000 can any one nelp me I have Done every thing by the book and I Erase the 2732 and new and the Eraser has Erase the 2764 and the 27512 OK
 

Attachments

Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top