Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need help me to convert the code to hex code

Status
Not open for further replies.
I

intan

Member level 2
Joined
Feb 16, 2009
Messages
53
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,931
led hex code

hi!
can somebody help me to convert this code to hex code?
i m using pic 16f876a and hitech c language
i hv tried many times but still cant work
thanks in advance


#include<pic.h>

//===============configuration==============================
__CONFIG (0x3F32);

//===============define IO port=============================
#define lcd PORTC
#define RS RA2
#define E RA5
#define CHANNEL0 0b10000001 // AN0
#define CHANNEL1 0b10001001 // AN1

#define fanA RB4
#define fanB RB3
#define ledA RB2
#define ledB RB1

//==============FUNCTION PTOTOTYPE=========================
void e_pulse(void);
void delay(unsigned short i);
void send_char(unsigned char data);
void send_config(unsigned char data);
void lcd_goto(unsigned char data);
void lcd_clr(void);
void dis_num(unsigned long data);
void increment(unsigned long data);
void read_adc(void);
unsigned short read_temp(void);

//====================MAIN================================
unsigned short result;
unsigned short temp,tempA,tempB;

void main(void)
{
ADRESH=0; //clear A/D result
ADRESL=0; //clear A/D result

//setting ADCON1 Register
ADCON1=0b11000101; // A/D result right justified,
// configure RA2 and RA5 as digital I/O

TRISA=0b00011011; //configure PORTA I/O direction
TRISB=0b00000000; //configure PORTB as output
TRISC=0b00000000; //configure PORTC as output

PORTA=0;
PORTB=0;

while(1)
{
send_config(0b00000001); //clear display at lcd
send_config(0b00000010); //Lcd Return to home
send_config(0b00000110); //entry mode-cursor increase 1
send_config(0b00001100); //diplay on, cursor off and cursor blink off
send_config(0b00111000); //function set

lcd_goto(0); //cursor start from beginning

//display character on LCD
send_char(' ');
send_char('T');
send_char('E');
send_char('M');
send_char('P');
send_char('.');
send_char('A');
send_char('=');

lcd_goto(20); //cursor go to 2nd line of the LCD

//display character on LCD
send_char(' ');
send_char('T');
send_char('E');
send_char('M');
send_char('P');
send_char('.');
send_char('B');
send_char('=');

while(1) //infinity loop
{
//sensor A
ADCON0=CHANNEL0; //CHANNEL1=0b10001001
lcd_goto(8);

read_adc();

temp=read_temp();
dis_num(temp/10);
send_char('.');
dis_num(temp%10);
send_char(0b11011111);
send_char('C');
send_char(' ');
send_char(' ');

tempA=temp;

//sensor B
ADCON0=CHANNEL1; //CHANNEL0=0b10000001

lcd_goto(28);

read_adc();

temp=read_temp();
dis_num(temp/10);
send_char('.');
dis_num(temp%10);
send_char(0b11011111);
send_char('C');
send_char(' ');
send_char(' ');

tempB=temp;

if((tempA>400)&&(tempB<500)) // *****************************************
{ // * LED A and Fan A activated only for *
ledA=1; // * temperature A greater than 40'C *
ledB=0; // * and temperature B less than 50'C *
fanA=1; // *****************************************
fanB=0;

}

else if((tempB>400)&&(tempA<500)) // *****************************************
{ // * LED B and Fan B activated only for *
ledA=0; // * temperature A less than 40'C and *
ledB=1; // * temperature B greater than 50'C *
fanA=0; // *****************************************
fanB=1;

}

else if((tempB>400)&&(tempA>500)) // *****************************************************
{ // * All LED A & LED B, Fan A & Fan B *
ledB=1; // * activated for temperature A greater than 40'C *
ledA=1; // * and temperature B greater than 50'C *
fanA=1; // *****************************************************
fanB=1;
;
}

else if((tempB<400)&&(tempA<500)) // *****************************************************
{ // * All LED A & LED B, Fan A & Fan B *
ledB=0; // * disactivated for temperature A less than 40'C *
ledA=0; // * and temperature B less than 50'C *
fanA=0; // *****************************************************
fanB=0;

}

delay(2000);

}

}

}



//==================subroutine LCD setting ==========================

void send_config(unsigned char data)
{
RS=0;
lcd=data;
delay(500);
e_pulse();
}

void e_pulse(void)
{
E=1;
delay(500);
E=0;
delay(500);
}

void send_char(unsigned char data)
{
RS=1;
lcd=data;
delay(500);
e_pulse();
}


void lcd_goto(unsigned char data)
{
if(data<16)
{
send_config(0x80+data);
}
else
{
data=data-20;
send_config(0xc0+data);
}
}


void lcd_clr(void)
{
RS=0;
send_config(0x01);
delay(600);
}


void dis_num(unsigned long data)
{
unsigned char hundred_thousand;
unsigned char ten_thousand;
unsigned char thousand;
unsigned char hundred;
unsigned char tenth;

hundred_thousand = data/100000;
data = data % 100000;
ten_thousand = data/10000;
data = data % 10000;
thousand = data / 1000;
data = data % 1000;
hundred = data / 100;
data = data % 100;
tenth = data / 10;
data = data % 10;

if(hundred_thousand>0)
{
send_char(hundred_thousand + 0x30); //0x30 added to become ASCII code
send_char(ten_thousand + 0x30);
send_char(thousand + 0x30);
send_char(hundred + 0x30);
send_char(tenth + 0x30);
send_char(data + 0x30);
}

else if(ten_thousand>0)
{
send_char(ten_thousand + 0x30); //0x30 added to become ASCII code
send_char(thousand + 0x30);
send_char(hundred + 0x30);
send_char(tenth + 0x30);
send_char(data + 0x30);
}
else if(thousand>0)
{
send_char(thousand + 0x30); //0x30 added to become ASCII code
send_char(hundred + 0x30);
send_char(tenth + 0x30);
send_char(data + 0x30);
}
else if(hundred>0)
{
send_char(hundred + 0x30); //0x30 added to become ASCII code
send_char(tenth + 0x30);
send_char(data + 0x30);
}
else if(tenth>0)
{
send_char(tenth + 0x30); //0x30 added to become ASCII code
send_char(data + 0x30);
}
else send_char(data + 0x30); //0x30 added to become ASCII code
}

void increment(unsigned long data)
{
unsigned short j;
for(j=10;j>0;j--)
{ lcd_goto(32);
data=data+1;
dis_num(data);
delay(10000);
}

}

//==================subroutine ADC=========================

void read_adc(void)
{
unsigned short i;
unsigned long result_temp=0;
for(i=2000;i>0;i-=1) //looping 2000 times for getting average value
{
ADGO = 1; //ADGO is the bit 2 of the ADCON0 register
while(ADGO==1); //ADC start, ADGO=0 after finish ADC progress
result=ADRESH;
result=result<<8; //shift to left for 8 bit
result=result|ADRESL; //10 bit result from ADC

result_temp+=result;
}
result = result_temp/2000; //getting average value

}

unsigned short read_temp(void)
{
unsigned short temp;
temp=result;
return temp;

}

//==================subroutine DELAY==========================
void delay(unsigned short i)
{
for(;i>0;i--);
}
 

hexcode für ceome

If you are using Hi-Tech compiler you just have to build the project and you end up with a hex file?
If you are getting compile errors, post the error messages and you will get help solving the problems.
 

Re: hex code

.. compiled with hi-tech C PICC PRO 9.6 PL4
 

Re: hex code

where is the "include <lcd.c>"

?
 

Re: hex code

to yus: thank you so much

but can u tell me how much the memory it takes for that code?
really thanks again
 

Re: hex code

intan said:
...
but can u tell me how much the memory it takes for that code?
...
Click to expand...
please see the attached "picc c editor.JPG" on my first post (included in the RAR file)..
 

Re: hex code

to yus:
sorry yus, i post wrong code.
can u plz convert the code for me again. its very urgent
thank you very much

#include<pic.h>

//===============configuration==============================
__CONFIG (0x3F32);

//===============define IO port=============================
#define lcd PORTC
#define RS RA2
#define E RA5
#define CHANNEL0 0b10000001 // AN0
#define CHANNEL1 0b10001001 // AN1

#define fanA RB4
#define fanB RB3
#define ledA RB2
#define ledB RB1

//==============FUNCTION PTOTOTYPE=========================
void e_pulse(void);
void delay(unsigned short i);
void send_char(unsigned char data);
void send_config(unsigned char data);
void lcd_goto(unsigned char data);
void lcd_clr(void);
void dis_num(unsigned long data);
void increment(unsigned long data);
void read_adc(void);
unsigned short read_temp(void);

//====================MAIN================================
unsigned short result;
unsigned short temp,tempA,tempB;

void main(void)
{
ADRESH=0; //clear A/D result
ADRESL=0; //clear A/D result

//setting ADCON1 Register
ADCON1=0b11000101; // A/D result right justified,
// configure RA2 and RA5 as digital I/O

TRISA=0b00011011; //configure PORTA I/O direction
TRISB=0b00000000; //configure PORTB as output
TRISC=0b00000000; //configure PORTC as output

PORTA=0;
PORTB=0;

while(1)
{
send_config(0b00000001); //clear display at lcd
send_config(0b00000010); //Lcd Return to home
send_config(0b00000110); //entry mode-cursor increase 1
send_config(0b00001100); //diplay on, cursor off and cursor blink off
send_config(0b00111000); //function set

lcd_goto(0); //cursor start from beginning

//display character on LCD
send_char(' ');
send_char('T');
send_char('E');
send_char('M');
send_char('P');
send_char('.');
send_char('A');
send_char('=');

lcd_goto(20); //cursor go to 2nd line of the LCD

//display character on LCD
send_char(' ');
send_char('T');
send_char('E');
send_char('M');
send_char('P');
send_char('.');
send_char('B');
send_char('=');

while(1) //infinity loop
{
//sensor A
ADCON0=CHANNEL0; //CHANNEL1=0b10001001
lcd_goto(8);

read_adc();

temp=read_temp();
dis_num(temp/10);
send_char('.');
dis_num(temp%10);
send_char(0b11011111);
send_char('C');
send_char(' ');
send_char(' ');

tempA=temp;

//sensor B
ADCON0=CHANNEL1; //CHANNEL0=0b10000001

lcd_goto(28);

read_adc();

temp=read_temp();
dis_num(temp/10);
send_char('.');
dis_num(temp%10);
send_char(0b11011111);
send_char('C');
send_char(' ');
send_char(' ');

tempB=temp;

if((tempA>400)&&(tempB<500)) // *****************************************
{ // * LED A and Fan A activated only for *
ledA=1; // * temperature A greater than 40'C *
ledB=0; // * and temperature B less than 50'C *
fanA=1; // *****************************************
fanB=0;

}

else if((tempA<400)&&(tempB>500)) // *****************************************
{ // * LED B and Fan B activated only for *
ledA=0; // * temperature A less than 40'C and *
ledB=1; // * temperature B greater than 50'C *
fanA=0; // *****************************************
fanB=1;

}

else if((tempA>400)&&(tempB>500)) // *****************************************************
{ // * All LED A & LED B, Fan A & Fan B *
ledB=1; // * activated for temperature A greater than 40'C *
ledA=1; // * and temperature B greater than 50'C *
fanA=1; // *****************************************************
fanB=1;
;
}

else if((tempA<400)&&(tempB<500)) // *****************************************************
{ // * All LED A & LED B, Fan A & Fan B *
ledB=0; // * disactivated for temperature A less than 40'C *
ledA=0; // * and temperature B less than 50'C *
fanA=0; // *****************************************************
fanB=0;

}

delay(2000);

}

}

}



//==================subroutine LCD setting ==========================

void send_config(unsigned char data)
{
RS=0;
lcd=data;
delay(500);
e_pulse();
}

void e_pulse(void)
{
E=1;
delay(500);
E=0;
delay(500);
}

void send_char(unsigned char data)
{
RS=1;
lcd=data;
delay(500);
e_pulse();
}


void lcd_goto(unsigned char data)
{
if(data<16)
{
send_config(0x80+data);
}
else
{
data=data-20;
send_config(0xc0+data);
}
}


void lcd_clr(void)
{
RS=0;
send_config(0x01);
delay(600);
}


void dis_num(unsigned long data)
{
unsigned char hundred_thousand;
unsigned char ten_thousand;
unsigned char thousand;
unsigned char hundred;
unsigned char tenth;

hundred_thousand = data/100000;
data = data % 100000;
ten_thousand = data/10000;
data = data % 10000;
thousand = data / 1000;
data = data % 1000;
hundred = data / 100;
data = data % 100;
tenth = data / 10;
data = data % 10;

if(hundred_thousand>0)
{
send_char(hundred_thousand + 0x30); //0x30 added to become ASCII code
send_char(ten_thousand + 0x30);
send_char(thousand + 0x30);
send_char(hundred + 0x30);
send_char(tenth + 0x30);
send_char(data + 0x30);
}

else if(ten_thousand>0)
{
send_char(ten_thousand + 0x30); //0x30 added to become ASCII code
send_char(thousand + 0x30);
send_char(hundred + 0x30);
send_char(tenth + 0x30);
send_char(data + 0x30);
}
else if(thousand>0)
{
send_char(thousand + 0x30); //0x30 added to become ASCII code
send_char(hundred + 0x30);
send_char(tenth + 0x30);
send_char(data + 0x30);
}
else if(hundred>0)
{
send_char(hundred + 0x30); //0x30 added to become ASCII code
send_char(tenth + 0x30);
send_char(data + 0x30);
}
else if(tenth>0)
{
send_char(tenth + 0x30); //0x30 added to become ASCII code
send_char(data + 0x30);
}
else send_char(data + 0x30); //0x30 added to become ASCII code
}

void increment(unsigned long data)
{
unsigned short j;
for(j=10;j>0;j--)
{ lcd_goto(32);
data=data+1;
dis_num(data);
delay(10000);
}

}

//==================subroutine ADC=========================

void read_adc(void)
{
unsigned short i;
unsigned long result_temp=0;
for(i=2000;i>0;i-=1) //looping 2000 times for getting average value
{
ADGO = 1; //ADGO is the bit 2 of the ADCON0 register
while(ADGO==1); //ADC start, ADGO=0 after finish ADC progress
result=ADRESH;
result=result<<8; //shift to left for 8 bit
result=result|ADRESL; //10 bit result from ADC

result_temp+=result;
}
result = result_temp/2000; //getting average value

}

unsigned short read_temp(void)
{
unsigned short temp;
temp=result;
return temp;

}

//==================subroutine DELAY==========================
void delay(unsigned short i)
{
for(;i>0;i--);
}
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top