diepvu1805
Member level 2
hi all,
I am using Lpc2103. I use Timer 0 interrupt and UART1 interrupt.
When used UART1 interrupt to receive data from device if T0 interrupt still enabled ==> The receive data often errors.
If I disabled T0 interrupt => The receive data is good.
Although UART1 interrupt is the highest-priority.
I can not explain that!
pls, help me!
Thank,
I am using Lpc2103. I use Timer 0 interrupt and UART1 interrupt.
When used UART1 interrupt to receive data from device if T0 interrupt still enabled ==> The receive data often errors.
If I disabled T0 interrupt => The receive data is good.
Although UART1 interrupt is the highest-priority.
I can not explain that!
pls, help me!
Thank,