Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] need help in using express pcb

Status
Not open for further replies.
A

anand_jha_30

Member level 2
Joined
Oct 29, 2010
Messages
50
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,616
I am creating a pcb layout on express pcb. The layout is from 'http://www.dharmanitech.com/2008/08/make-yourself-atmega32-starters-kit.html'. I wanted to know for any IC or connector that I choose what does the square dot stands for. Also I want to use 16 pin in line connector to connect lcd but could not locate in the library
 

Express PCB is a low level PCB design tool.. but i think it contain the connector models.. if u want to connect the LCD use burg strip lib. The Square dot stands for th PIN number 1 of the connector
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top