Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Nanotechnology - Is it useful?

Status
Not open for further replies.

purifier

Full Member level 4
Joined
Nov 30, 2004
Messages
220
Helped
9
Reputation
18
Reaction score
8
Trophy points
1,298
Activity points
2,570
Do we have any use of Nanotechnology in the field of ferrofluids?
 

hi nanotechnology is the present emerging technolg . nano sensors and anano bio sensors are making revolution inthe present life
 

Yes. Nanotechnology is definitely useful in this area.
--------------------------------------------------------------
A ferrofluid is a liquid which becomes strongly polarised in the presence of a magnetic field. Ferrofluids are composed of nanoscale ferromagnetic particles suspended in a carrier fluid, usually an organic solvent or water. The ferromagnetic nano-particles are coated with a surfactant to prevent their agglomeration (due to van der Waals and magnetic forces). Although the name suggests otherwise, ferrofluids do not display ferromagnetism, since they do not retain magnetisation in the absence of an externally-applied field. In fact, ferrofluids display paramagnetism, and are often referred as being "superparamagnetic" due to their large magnetic susceptibility. Although current theory does not preclude the possibility of a truly ferromagnetic fluid, no such fluid has yet been observed.
 

Thank you but I saw that earlier. There is a word nanoscale ferromagnetic particles in that definition but its not making sense to me as to how nanotechnology is aiding in it...
 

Nanotechnology is aiding the particles to be at nano dimensions. If developements in nanotechnology were not there, it would have been just ferromagnetic particles instead of " nanoscale ferromagnetic particles". the word originated because of the advanced made in the field of nanotechnology only. does that satisfy you?

Added after 7 minutes:

In simple words, ferrofluids are an application of nanotechnology.
Due to the progress of nanotechnology only they came into existance. so there is no point of nanotechnology being useful in ferrofluids, since it is the basis for it.
 

Thank you so much Sir. That clarifies my doubt. :)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top