soumen21
Member level 5
Hi Experts,
I have used Micron make MT29F4G08 NAND flash in one my design. Recently, I observed the flash contents gets corrupted when the system is OFF for certain period of time. It could be 2 hours or more. There is a bit flip occurring in the flash, though the firmware implements 4 bit error check correction (ECC). Could you please guide what could be the problem and what is the probable solution for this?
Regards
Soumen
I have used Micron make MT29F4G08 NAND flash in one my design. Recently, I observed the flash contents gets corrupted when the system is OFF for certain period of time. It could be 2 hours or more. There is a bit flip occurring in the flash, though the firmware implements 4 bit error check correction (ECC). Could you please guide what could be the problem and what is the probable solution for this?
Regards
Soumen