Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Naming Convention for Cadence Library

Status
Not open for further replies.
C

chu

Junior Member level 3
Joined
Jul 25, 2005
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,589
Hi all,

I need some help on the convention naming of cadence library.

(1) I have found that some companies use only lower case letter (small letter word) to name their Library Name, Cell Name, Schematic Name. Any reason?

(2) How about the Port-name and Net-name inside the Schematic?

I've heard that the wrong naming (eg:mixing upper case and lower case letter) will results in shorting in net, but do not sure where its happen (layout netlist? extracted netlist? versim or synthesis nelist? or etc.).

Thanks up-front.

regards,
chu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top