anotherbrick
Full Member level 4
- Joined
- Jan 10, 2009
- Messages
- 217
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,298
- Location
- Istanbul , Turkey
- Activity points
- 3,143
hello dear forum,
I have completed hardware design of my new PLC project based on STM32-E407 board of OLIMEX
this PLC will be modular type supporting 80 / 48 digital I / O
the CPU board will have 8 analog inputs (0-10V) , 2 analog outputs (1x +/-10V , 1x 0-10V)
4x 200 Khz puls/dir outputs , 1x AB encoder input , 2xRS232 , 1x RS485 and the ethernet port of E407
there will be analog expansion boards too increasing the analog I/O up to 40 / 34
I am currently developing the software part of the project which will be ready soon
the PLC will have STL programing language also developed by myself
here the photo with I/O boards
**broken link removed**
I have completed hardware design of my new PLC project based on STM32-E407 board of OLIMEX
this PLC will be modular type supporting 80 / 48 digital I / O
the CPU board will have 8 analog inputs (0-10V) , 2 analog outputs (1x +/-10V , 1x 0-10V)
4x 200 Khz puls/dir outputs , 1x AB encoder input , 2xRS232 , 1x RS485 and the ethernet port of E407
there will be analog expansion boards too increasing the analog I/O up to 40 / 34
I am currently developing the software part of the project which will be ready soon
the PLC will have STL programing language also developed by myself
here the photo with I/O boards
**broken link removed**