Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

my PLC design based on STM32F4

Status
Not open for further replies.

anotherbrick

Full Member level 4
Joined
Jan 10, 2009
Messages
217
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Location
Istanbul , Turkey
Activity points
3,142
hello dear forum,

I have completed hardware design of my new PLC project based on STM32-E407 board of OLIMEX
this PLC will be modular type supporting 80 / 48 digital I / O

the CPU board will have 8 analog inputs (0-10V) , 2 analog outputs (1x +/-10V , 1x 0-10V)
4x 200 Khz puls/dir outputs , 1x AB encoder input , 2xRS232 , 1x RS485 and the ethernet port of E407

there will be analog expansion boards too increasing the analog I/O up to 40 / 34

I am currently developing the software part of the project which will be ready soon
the PLC will have STL programing language also developed by myself

here the photo with I/O boards
**broken link removed**
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top