Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

My first wireless project

Status
Not open for further replies.

antoine magdi

Newbie level 5
Joined
Dec 14, 2008
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,358
wireless project

Hello every one!

this is my first wireless project.....
i have a problem in my life, i forget a lot.... so i thought in idea that may helf...
i want to relate for example my portfolio whith a tag or anything else that sends
waves and receive it by an adapter attached to me when i go away from it i
sense any output (buzzer, vibration,etc ....)

Any one can help me! the best cheaper idea, the required component,
the algorithm used, a link for a project like that,etc....

Thanks in advance
 

First of all you have to mention how far you need to send the remote signal.
 

Here is a simple R/C transmitter and receiver on 27MHz. The transmitter crystal could be replaced with any other crystal around that frequency range. The RX relay could be replaced with a buzzer, etc.
 
the thread sounds like some secret message being trasnnmitted online.. :|
 

I was thinking to this, but I said to myself that 1m is too far for me to get the feeling. I would like << 1mm.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top