Here I am posting mikroC PRO PIC code for multiple I2C LCDs. With this you can have a device like DS1307 of I2C bus and also 8 I2C PCF8574T based LCDs.
I didn't post this in my previous thread in DIY section because its title had CCS C Project but this is mikroC PRO PIC project.
I used Arduino I2C LCD library and controlled the backlight of the LCD. Have to modify my mikroC code so that backlight can be controlled.
- - - Updated - - -
The I2C modules are just great. One can also control the brightness of the baclkight using PWM. I tested using Arduino I2C Library and PWM code. There is a two pin header with a jumper clip which when shorted connects 5V to A pin of LCD. If jumper clip is removed and PWM is input then it goes through a transistor to A pin of LCD. I increased the brightness of backlight in steps of 10 from 0 to 255 and it just worked great.
where ca I find the mikroC PRO PIC code for multiple I2C LCDs you wrote for I2C PCF8574T based LCDs ?
I am very interesting because I have a LCM1602 IIC I2C-LCD board and I want to use it on my EasyPIC v7 but there is no library with Mikro C compiler ?