Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Multiple 24LC256 with 16F877 - anybody can share?

Status
Not open for further replies.
O

Orcino Borges

Newbie level 6
Newbie level 6
Joined
May 18, 2001
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
19
Multiple 24LC256

Somebody can send me an example using multiplas 24LC256 with 16F877 ? if possivel using the compiler of the CCS.


Very Thanks

Orcino
 

Usualy, this kind of EEPROMS have tree or four signals to configure an address. There are two signals (I2C bus signals) that are common to all the memories, and are connected to the microcontroller. You have to force a different address to every memory in order to share the same bus.
The access to the memory via the I2C bus need an address wich value must be selected by your program.
 

Multiple memories...

Hello,

Don't forget you can use a 2 to 4 or 3 to 8 encoder to access more
chips if you have limited i/o pins.

Bye.
:roll: :roll:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top