Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Moved]: Voice transceiver module

Status
Not open for further replies.

saluvs

Newbie level 3
Joined
Jan 16, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
25
Hi
I am currently doing a project which is basically voice record and playback but the playback is at a different place(at a range of over 500m) at different time(by scheduling).So now am thinking about connecting ISD15100 out to ATMEGA16 adc input and then use HT12E/D encoder/decoder module and RF transceiver module for voice transmission.Will this method actually work??Or should I chose some voice transceiver module instead??

Can you please give some suggestions??
 

Depends on if the playback at the other location should happen immediately after the recording, or any time later.
In the first case use any kind of transmitter-receiver to send the recording signal to the playback site.
In the second, use a voice memory to record, then later to replay the record at the other site like in the first case. Recording should be done at the "other site" in both cases
 
  • Like
Reactions: saluvs

    saluvs

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top